BEST Verified Huawei H31-341_V2.5 Exam Questions (2026)
The Best Practice Test Preparation for the H31-341_V2.5 Certification Exam
Huawei H31-341_V2.5 (HCIP-Transmission V2.5) Certification Exam is a certification program designed to validate the skills and knowledge related to transmission technologies of Huawei equipment. The HCIP-Transmission V2.5 certification exam is an advanced level certification program that focuses on validating the knowledge and skills of transmission network engineers. HCIP-Transmission V2.5 certification exam covers all aspects of transmission technologies, including optical transmission, Ethernet transmission, microwave transmission, and access network technologies.
Huawei H31-341_V2.5 exam covers a range of topics related to transmission networks, including system architecture, network design, equipment configuration, and maintenance. H31-341_V2.5 exam also covers topics related to optical fiber transmission, microwave transmission, and network synchronization. Candidates are expected to have a good understanding of transmission network technologies and have the ability to design and implement transmission solutions.
NEW QUESTION # 59
Which of the following ITLI-T recommendations define the OTN frame structure?
- A. G694
- B. G652
- C. G709
- D. G975
Answer: C
NEW QUESTION # 60
The 5A deployment of OptiXtrans DC908 refers to port self-adaptation, fiber self-discovery, fiber self-discovery, wavelength self-configuration, and optical layer self-commissioning.
- A. True
- B. False
Answer: A
NEW QUESTION # 61
Which of the following is not a function of RSVP-TE?
- A. LSP path optimization
- B. LSP rerouting
- C. Establishing Neighborhood Relationships
- D. LSP deletion
Answer: C
NEW QUESTION # 62
The setting of alarm reversal is port-based.
- A. True
- B. False
Answer: A
NEW QUESTION # 63
The EPL service exclusively uses the bandwidth on the line. This is very secure. Dedicated line application for VIP customers.
- A. True
- B. False
Answer: A
NEW QUESTION # 64
The current sparse wavelength division multiplexing system generally works in the band from 1271nm to 1611nm. Which of the following is the channel spacing?
- A. 5nm
- B. 20nm
- C. 18nm
- D. 10nm
Answer: B
NEW QUESTION # 65
Like STP equipment, NG WDM equipment can practice network element configuration on the network management system through pre-configuration.
- A. False
- B. True
Answer: A
NEW QUESTION # 66
Which of the following statements about the U2000 license is wrong?
- A. Each license file corresponds to the equipment serial number (ESN) of a 2000 computer, so it can only be used on the corresponding computer
- B. Do not modify the license file, otherwise the license file will fail
- C. Official U2000 licenses vary by operating system platform. You must apply for a U2000 license based on a specific operating system
- D. The U2000 license file is named in "OXdat format
Answer: C
NEW QUESTION # 67
If a ROADM site adopts WSS+RMU configuration, which of the following impact on SOM is wrong?
- A. If the RMU is used locally to add waves and has an optical amplifier, the OSNR value of the wavelength detected by the SOM in the pass-through direction will deviate from the actual value
- B. There is an optical amplifier locally but no filter. The full-wave noise of the local optical amplifier affects the OSNR of the wavelength in the pass-through direction.
- C. The source and sink optical amplifiers of the optical crossover at this site must be in the same network element
Answer: A
NEW QUESTION # 68
Which of the following descriptions about the DWSS20 board is correct? (Multiple choice)
- A. Support the optical power query function of DM01~DM20, AM1~AM20 and IN/OUI optical ports on the network management system.
- B. For the pass-through service, only one pair of optical fibers needs to be connected in the two directions.
- C. It can realize the optical power adjustment function for each wavelength in the sending direction and receiving direction.
- D. It can realize the multiplexing and demultiplexing functions of coherent signals and non-coherent signals.
Answer: A,B,D
NEW QUESTION # 69
Mandatory switching. Fiber switching manual switching and motion switching are in descending order of priority.
- A. True
- B. False
Answer: A
NEW QUESTION # 70
Which of the following descriptions about the TMK1UNS5 board is wrong?
- A. Support mixed transmission of ODUO, ODU1, ODU2, ODU2e, ODU3, ODU4, ODUflex.
- B. It supports relay mode, which can be used in the electrical relay station in the system to realize the electrical relay function of the corresponding optical signal.
- C. Support the transmission of OTN services whose total bandwidth does not exceed 200 Gbit/s.
- D. This board belongs to the unified line board, and the current version supports mixed transmission of OTN service, SDH service and packet service.
Answer: A
NEW QUESTION # 71
Which of the following is the electrical layer overhead of OTN? (Multiple choice)
- A. OTUR
- B. Och
- C. OPUk
- D. ODUk
Answer: A,C,D
NEW QUESTION # 72
Which of the following parts does the general encapsulation format of PWE3 consist of? (Multiple choice)
- A. Type
- B. Control byte CW
- C. PLA LOAD
- D. MPLS labels
Answer: B,C,D
NEW QUESTION # 73
In the fault handling scenario, human misoperation will lead to business interruption. Which of the following descriptions about possible causes is wrong?
- A. The alarm automatic reporting status is set to not report
- B. The transceiver FEC mode does not match
- C. AIS maintenance signal is enabled
- D. Channel protection mismatch
Answer: A
NEW QUESTION # 74
Which of the following options are available for the emulation mode supported by the CES service carried by PWE3? (Multiple choice)
- A. Unstructured Simulation Mode or SAToP
- B. Structured simulation mode is CESoPSN
- C. Packet-based circuit emulation or CEP
Answer: A,B,C
NEW QUESTION # 75
The output network requires a higher cost than the belt network. But provides a more reliable management channel.
- A. True
- B. False
Answer: A
NEW QUESTION # 76
Both the SC2 and ST2 boards support the processing and transparent transmission of 1588V2 signals.
- A. False
- B. True
Answer: A
NEW QUESTION # 77
......
Huawei H31-341_V2.5: HCIP-Transmission V2.5 exam is a certification exam offered by Huawei Technologies Co. Ltd. H31-341_V2.5 exam is designed to test the knowledge and skills of candidates in the field of transmission engineering. HCIP-Transmission V2.5 certification helps candidates to enhance their understanding of the latest technologies in the field of transmission, and to gain recognition for their skills and knowledge.
H31-341_V2.5 Exam Dumps, Practice Test Questions BUNDLE PACK: https://torrentvce.pdfdumps.com/H31-341_V2.5-valid-exam.html