HQT-4160 Premium PDF & Test Engine Files with 57 Questions & Answers
Get 100% Real HQT-4160 Exam Questions, Accurate & Verified Answers As Seen in the Real Exam!
Hitachi HQT-4160 certification exam is designed for IT professionals who have experience in installing and configuring enterprise-class storage systems. HQT-4160 exam is ideal for system administrators, storage administrators, and IT professionals who are responsible for maintaining and managing storage infrastructure. Hitachi Vantara Qualified Professional - VSP 5000 Series Installation certification exam is also suitable for professionals who are interested in advancing their careers in the field of storage technology.
NEW QUESTION # 30
How many IP addresses should you configure to integrate a VSP 5000 series storage system on the customer public network?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
Explanation:
To integrate a VSP 5000 series storage system into the customer public network, you should configure two IP addresses - one for each Service Processor (SVP) to provide redundancy and ensure high availability for management access.
NEW QUESTION # 31
What distinguishes the back-end design of VSP 5000 systems from traditional storage systems?
- A. The absence of any physical drives
- B. The use of solid-state drives only
- C. The use of Disk Adapters (DKAs) for enhanced data management
- D. The direct connection to cloud storage
Answer: C
Explanation:
In the Hitachi VSP 5000 storage system:
Disk Adapters (DKAs) are specialized components that manage communication between the storage controllers and physical disks.
DKAs provide:
Efficient I/O routing
Support for multiple disk types (SSD, SAS, etc.)
RAID management and data distribution
High performance and reliability compared to traditional storage systems that rely on simpler disk controllers.
This back-end architecture allows the VSP 5000 to handle large-scale, high-speed enterprise workloads while maintaining data protection and flexibility.
NEW QUESTION # 32
What are two ways to identify that a problem occurred on a VSP 5000 system? (Choose two.)
- A. The Remote Ops SVP Agent called home and a support case was generated.
- B. An Alert Information Message (AIM) was generated and communicated by SNMP to notify the customer.
- C. A SIM was generated and could be displayed using the SVP GUI.
- D. The Master Alarm LED at the top right of the front door is lit.
Answer: C,D
Explanation:
The Master Alarm LED at the top right of the front door is lit.
A lit Master Alarm LED is a direct hardware indicator that a problem has occurred on the system.
A SIM was generated and could be displayed using the SVP GUI.
A Service Information Message (SIM) indicates an event or error and can be viewed via the SVP GUI, helping identify and diagnose system issues.
NEW QUESTION # 33
What is the first step in troubleshooting incidents on VSP 5000 storage systems?
- A. Upgrading the firmware
- B. Rebooting the system
- C. Checking the log files
- D. Contacting customer support
Answer: C
Explanation:
In the Hitachi VSP 5000 storage system, log files are the first source of information when troubleshooting any incident.
Reasons to start with log files:
Identify error messages related to hardware, connectivity, or software issues.
Determine the exact time and nature of failures.
Assist in diagnosing problems without disrupting operations.
Provide detailed information for support escalation if needed.
NEW QUESTION # 34
In a VSP 5100 a drive in a RAID5 Parity Group has failed and has been blocked by the microcode. As a result, which process gets automatically started?
- A. Sparing Copy
- B. Copy Back
- C. Dynamic Sparing
- D. Correction Copy
Answer: D
Explanation:
When a drive in a RAID5 Parity Group fails and is blocked by the microcode in a VSP 5100, the Correction Copy process is automatically started to rebuild the data onto a spare drive.
NEW QUESTION # 35
A customer wants to upgrade a diskless VSP 5100 to a VSP 5500. Which three types of components will be added during the upgrade? (Choose three.)
- A. Hitachi Interconnect Edges (HIEs)
- B. Interconnect Switches (ISWs)
- C. Channel Boards (CHBs)
- D. Hitachi Service and Network Box (HSNBX)
- E. Controllers (CTLs)
Answer: B,C,E
NEW QUESTION # 36
What is the primary function of management software in VSP 5000 storage systems?
- A. To manage and configure storage resources
- B. To physically secure the storage system
- C. To enhance the cooling efficiency of the system
- D. To increase the storage capacity automatically
Answer: A
Explanation:
Management software for the Hitachi VSP 5000 is used to administer, monitor, and configure the storage environment.
Common management tools include platforms from Hitachi Vantara such as storage management suites that allow administrators to:
Create and manage storage volumes (LUNs)
Configure RAID groups and storage pools
Assign storage to hosts
Monitor system health and performance
Manage replication and data protection
Perform firmware updates and system configuration
These tools provide a centralized interface to control and optimize the storage system.
NEW QUESTION # 37
Which two steps should you perform before a VSP 5000 system installation? (Choose two.)
- A. Use the Administrator manual to provide the customer with a list of suitable IP addresses for their public network.
- B. Ensure that you have the 3 CE jumpers required to configure the system.
- C. Use the Maintenance manual to check any power and environmental requirements.
- D. Ensure you have a Windows laptop configured as Maintenance laptop prior to the installation.
Answer: C,D
Explanation:
Use the Maintenance manual to check any power and environmental requirements.
Reviewing the Maintenance manual ensures that the installation site meets all necessary power and environmental specifications for the VSP 5000 system.
Ensure you have a Windows laptop configured as Maintenance laptop prior to the installation.
A properly configured Maintenance laptop is essential for system setup, configuration, and troubleshooting during the installation process.
NEW QUESTION # 38
Which three Channel Board (CHB) protocols are supported on a VSP 5000 system? (Choose three.)
- A. Wide SCSI
- B. FC
- C. SCSI
- D. FICON
- E. iSCSI
Answer: B,D,E
Explanation:
iSCSI
The VSP 5000 supports iSCSI Channel Boards, enabling block storage over IP networks.
FICON
FICON Channel Boards are supported for mainframe connectivity.
FC
Fibre Channel (FC) Channel Boards are supported for high-performance SAN connectivity.
NEW QUESTION # 39
What are the components involved in setting up a VSP 5000 system configuration? (Choose Two)
- A. Power units
- B. User interfaces
- C. Management software
- D. Parity Groups
Answer: C,D
Explanation:
When configuring a Hitachi VSP 5000 storage system, two key components are critical:
Parity Groups (A)
These are RAID-based groups of disks that store data and parity information.
They define how data is distributed and protected across physical drives.
Essential for creating storage pools and volumes for hosts.
Management Software (D)
Provides the interface to configure, monitor, and manage storage resources.
Tasks include:
Creating volumes/LUNs
Assigning storage to hosts
Monitoring health and performance
Managing replication and backups
NEW QUESTION # 40
You need to add another SBX with 4 drive boxes (DBS2) and 16 drives to a VSP 5100. What is the correct procedure?
- A. Insert the drives in the DBs. Mount the DBs in the rack and install them with the Maintenance Utility.
- B. Mount the empty DBs in the rack. Insert the drives in the DBs and install them with the Maintenance Utility.
- C. Mount the empty DBs in the rack and attach the cables. Install the DBs with the Maintenance Utility. Insert the drives in the DBs and install them with the Maintenance Utility.
- D. Insert the drives in the DBs. Mount the DBs in the rack and attach the cables. Install the drives with the Maintenance Utility.
Answer: B
Explanation:
The correct procedure is to first mount the empty drive boxes (DBs) in the rack, then insert the drives into the DBs, and finally use the Maintenance Utility to install and configure the new hardware. This ensures proper detection and initialization by the system.
NEW QUESTION # 41
A disk drive is in failed state in a VSP 5600 system and you want to replace it. Which two actions should you perform as part of the replacement procedure? (Choose two.)
- A. Block the drive with the Maintenance Utility.
- B. Activate Dynamic Sparing.
- C. Replace the drive.
- D. Initiate the Correction Copy process.
Answer: A,C
Explanation:
Replace the drive.
Physically replacing the failed drive is a required step in the drive replacement procedure.
Block the drive with the Maintenance Utility.
Before removal, the failed drive should be logically blocked using the Maintenance Utility to safely isolate it from the system and prevent I/O errors during replacement.
NEW QUESTION # 42
When installing a VSP 5000, it's essential to properly plan the __________ to avoid future connectivity issues.
- A. cable management
- B. network configuration
- C. power distribution
- D. cooling paths
Answer: B
Explanation:
During installation of the Hitachi VSP 5000 enterprise storage system, network configuration planning is essential to ensure proper communication between the storage array and other components in the IT infrastructure.
Key elements of network configuration include:
Assigning IP addresses for management interfaces
Configuring VLANs and subnets
Planning SAN connectivity (Fibre Channel / Ethernet)
Setting up redundant network paths
Ensuring compatibility with existing switches and hosts
Proper planning prevents common connectivity problems such as:
host access failures
misrouted traffic
management interface inaccessibility.
NEW QUESTION # 43
You need to perform a microcode upgrade on a VSP 5500H and you first want to backup the configuration. How do you accomplish this task?
- A. Connect the maintenance laptop to the SVP port and use Copy Config Files.
- B. Connect a USB drive to the SVP and use Copy Config Files.
- C. Use Copy Config Files under the Maintenance Utility.
- D. Use Copy Config Files under the Initial Setting menu of the SVP GUI.
Answer: D
Explanation:
To back up the configuration before a microcode upgrade on a VSP 5500H, you should use the
"Copy Config Files" option available under the Initial Setting menu in the SVP GUI. This ensures a proper backup of system settings and configuration.
NEW QUESTION # 44
You are installing a VSP 5100. Which two DKU types are supported at level 1 in the DKU boxes?
(Choose two.)
- A. SBX
- B. UBX
- C. FBX
- D. DBS2
Answer: A,D
Explanation:
SBX
SBX (Small Box) drive enclosures are supported at level 1 in the DKU boxes for VSP 5100 systems.
DBS2
DBS2 (Drive Box S2) enclosures are also supported at level 1 in the DKU boxes for VSP 5100 systems.
NEW QUESTION # 45
Which statement is correct regarding the Interconnect Switches (ISWs) on VSP 5000 systems?
- A. ISWs are standalone, optional switches than can be used for both network and data path.
- B. ISWs are switches that provide redundancy for data path and they are only used when the number of CBX pairs is higher than two.
- C. ISWs are switches that route data between nodes using Hitachi Interconnect Edge and X-Path cables, and they are located on the Hitachi Service and Network Boxes (HSNBXs).
- D. ISWs are switches that route data between nodes and they are located on each controller of the node.
Answer: A
Explanation:
The Interconnect Switches on a VSP 5000 are delivered as standalone 1 U switch chassis that house both the PCIe "interconnect" modules (for routing data between controller nodes) and an Ethernet switch (for management/network traffic), so they serve both network and data-path roles.
NEW QUESTION # 46
How is the internal SVP IP address set up on a VSP 5000 system?
- A. The Hitachi Distribution Centers pre-configure the same IP address on all new machines.
- B. It is generated by the SSVP.
- C. Using the "Set IP Address" on the SVP GUI.
- D. It must be set up by the customer's network administrator.
Answer: B
Explanation:
The internal SVP IP address on a VSP 5000 system is automatically generated by the SSVP (Service Support Processor) during system initialization and is not manually configured.
NEW QUESTION # 47
......
The HQT-4160 certification exam is a vendor-neutral certification that is designed to help IT professionals enhance their skills and knowledge in Hitachi Vantara storage systems. Hitachi Vantara Qualified Professional - VSP 5000 Series Installation certification exam is designed to validate the skills and knowledge of IT professionals, including system administrators, storage administrators, and network administrators. Hitachi Vantara Qualified Professional - VSP 5000 Series Installation certification exam is an excellent way for IT professionals to demonstrate their expertise in Hitachi Vantara storage systems and stand out in the competitive IT job market.
HQT-4160 Premium Files Practice Valid Exam Dumps Question: https://torrentvce.pdfdumps.com/HQT-4160-valid-exam.html